The specification below is for our 77mm insulated slat which rolls up into a 300mm top box, this slat ids used for 90% of our installations. However, should there be restricted headroom, we have other options that utilize a smaller top box.
Our remote control insulated roller garage doors are manufactured from foam-filled aluminium slats and operated by key fob transmitters as standard. They are designed to require minimal headroom above the opening and are fully CE compliant and safety tested.
Description: CD77 twin-walled aluminium slat, insulated with high density foam to reduce heat loss and sound transmission.
Dimensions: Nominally 78.5mm high x 17mm thick Assembly: Slats are held in place with high performance nylon end caps
For additional strength a 77mm extruded aluminium bottom slat which incorporates a 25mm rubber seal to help prevent water ingress and draughts.
3mm galvanised steel. Designed to fit into the top of the guide rail for easy location during installation.
Extruded aluminium with dense brush strip insert for improved insulation. Dimensions: Doors up to 3500mm wide supplied with 75mm wide x 27mm deep as standard. Doors over 3500mm wide supplied with 90mm wide x 34mm deep as standard.
Remote unit: Remote receiver unit with integral courtesy light and two key fob transmitters with rolling code technology. Safety: All receiver units supplied with a bottom slat safety edge pressure sensitive device as standard.
Maximum width: 5500mm
Headroom required: 300mm
Standard: White, Burgundy, Navy Blue, Light Beige, Brown, Fir Green, Yellow, Medium Oak, Light Grey, Anthracite, Black
Textured Woodgrain (additional Surcharge): Rosewood, Mahogany, Golden Oak
SeceuroGlide are extremely versatile and can accommodate curved or non-standard openings. They may be fitted in any of the following ways:
Face Fix – Internal Installed inside the opening. Here the inside edge of the guide rails line up with the brick opening. Ideal where headroom inside the garage isn’t seriously restricted. Internal reveal fixing may be used to great effect in arched openings.
Reveal Fix – Installed within the opening itself. Maximises internal space in the garage whilst not obscuring the exterior of the garage. Requires good reveal headroom. Reveal fixing the door also reduces with drive through width of the door by the width of the guide rails.
SHUTTER BOX (OPTIONAL)
Roll formed aluminium in either one or two sections (90° facia and 45° lid), Powdercoated to match